Park Tool Reamer/Facer
Buying Options
Part Numbers
All Colors/Sizes

The Park Tool 758.2 will ream and face the head tubes of bike using the OnePointFive Interface Standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750 Centering Cone Adaptor.

  • 1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facer
  • Bores a machined surface to a depth of approximately 25mm and then faces top of headtube surface

    SHIS terminology: The 758.2 is for EC49 upper and lower headtubes.

NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.

Diameter Onepointfive Std.
BikePedia Item ID: 638174
Mfr's Part #: 758.2
UPC: 763477013835

Write your own review Write your own review

Be the first to review this item

BikePedia Home | Feedback & Questions | Privacy Policy
All information and images herein are © BikePedia 2017 and cannot be reproduced without the expressed written
permission of BikePedia and its affiliates. BikePedia is for non-commercial purposes. All rights reserved.